Floor convectors for cooling and heating MCHC
DESCRIPTION:
Floor convectors for cooling and heating are products that are used in places with large glass surfaces.
They are used as primary or secondary heating or cooling source in combination with other heating or cooling elements.
1 HOUSING
2 GRILLE
3 HEAT EXCHANGER
4 LEVEL ADJUSTING SCREW
5 TANGENTIAL FAN
6 ELECTRIC CONNECTION SOCKET
7 CONDENSATION COLLECTION DRIP TRAY
OPERATION PRINCIPLE:
Cooling and heating floor convectors apply the principle of forced air circulation, that is achieved with the usage of a tangential fan.
In cooling mode, tangential fan draws in warm air from the surroundings and cools it on the way through the heat exchanger. The cooled air is then blown back into the room. As the cooling of the air generates condensation, a condensation collection tray where condense is collected and drained is installed below the heat exchanger.
In heating mode, cold air enters into the floor convector, warms up on the way through the heat exchangers and is blown back into the room.
DIMENSIONS:
WIDTH (A) X HEIGHT (B) X LENGTH (L)
